
Storage tank lining removal by induction
Evaluate induction stripping for heavy linings on steel storage tanks. Check lining thickness, plate condition, access and surface requirements before relining.
When induction fits a tank relining project
Induction heats the steel plate locally to loosen the lining bond, so the bulk material can be lifted and collected. A tank relining contractor can assess suitability from the lining type and thickness, the steel grade and plate thickness, the area to strip, and access to the floor or shell. A representative panel or test area helps establish how the lining releases and what preparation the exposed surface still needs.
Review the CR2100 induction system
Where it fits
Steel storage tanks
Assess tanks with heavy linings where relining is scheduled and internal access is available.
Tank site preparation
Consider the work where a tank has to be released for inspection or refurbishment.
Refurbishment planning
Compare the total removal cost by coated area before choosing a method.
From lined tank to a prepared steel surface
Assess the tank
Identify the steel grade, plate thickness, lining system, measured lining thickness and area to strip. Note obstructions and access restrictions.
Test on a representative area
Establish whether the lining releases at a workable rate and what the surface looks like afterwards.
Strip, collect and inspect
Loosen the lining over the working area, collect the debris, and check the exposed steel against the coating specification.
What controls the process?
- Plate thickness
- Thin plate transfers heat to the other side, so the minimum plate thickness has to be checked before the process is used.
- Lining type
- Different lining systems need different amounts of heat, and some are not suitable at all.
- Access and services
- Check tool clearance around the floor and shell, available power and cooling, and site rules for confined-space access and ventilation.
Induction system for tank lining removal
Does induction heating burn the lining off?
No. The heat weakens the bond between the lining and the steel so that the lining can be lifted mechanically. The coating still has to be scraped and collected afterwards.
Can the tank be relined straight after stripping?
Not without checking the steel. The exposed surface, its cleanliness and its profile are assessed against the coating specification, and further preparation is often required.
